local Hilti Store or online at: www. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. - Keep power cord away from heated surfaces. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. 1. Power Up the Machine. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). Keep all fasteners tight and be sure the power blower is in safe working condition. ▷ Remove any adjusting key or wrench before turning the power tool on. . - Do not allow children to play on or around machine. Pulling on the. Remove power cord plug from battery pack. To register your warranty online, visit us at • Usando uma chave de. - Report machine damage or faulty operation immediately. ▷ Support panels or any oversized workpiece to minimize the risk. Follow the maintenance instructions provided on page 13 - 15 of this manual. máquina e anulará as proteções incluídas. Do not use the power socket on the wet vacuum extractor. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. Raise the scrub head to the transport position by stepping on. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted.